This is a newly designed multi-functional portable folding phone seat light, with selfie light, tripod, Bluetooth remote control camera, table lamp and other functions. Foldable and portable design, very suitable for daily photography, chat, TV series use.

Use note :【 Please read carefully before purchase 】

1When you receive the new bracket, due to the first use, relatively tight, not easy to open, please put the bracket on the desktop level, according to the direction indicated by the label, with a certain force to push forward, rather than push down and push again, which will cause the product can not open and use normally!

2: When clamping the mobile phone, please follow the clamping position of the mobile phone on the video and product picture, and should be fixed in the middle of the mobile phone. If only one end of the phone is clamped, the weight difference between the two sides will be too large, causing tilt and cannot be stabilized. This is not a technical support problem, but the use of the operation problem, please use normal! Before you can shoot normally, you need to adjust.

3: The new bracket will store part of the electricity before leaving the factory, but due to the early production, there will be backup power loss. When you receive the product, there is no power to support the filling light to start normally, please charge it before use. In the case of low power, the remaining power can be used before charging.

4: Application scenario: The device needs to be placed on a hard horizontal surface for use: such as the ground and table top, if it is used on a soft or non-horizontal bottom, when the support rod is stretched to a certain height, it will lose balance due to gravity and cannot stand!

5: The rotating head of the cross bar is fixed with screws. During use, it is necessary to stretch and rotate frequently. If it is loose, it can adjust and tighten by itself. It’s not the quality!

When using the bar, please adjust the height according to the actual weight of the phone, so that the support can better balance and stand firmly. When you need the support bar to stand, you can stretch it to the highest point.

6: When the support is upright, please do not pull out the rotating head of the cross bar, because the support rod has a fixed ring, which needs to be better fixed to prevent the support from swaying when standing.

Pull out the swivel head only when you need to use the crossbar. 【 See the picture 】

Description:

1. Foldable and portable design, easy to use and carry when traveling or working outdoors.

2. Equipped with 3 kinds of color light and 7 kinds of light effect complement light design, to meet your various brightness needs.

As shown in 3. It can be used as a lamp.

As shown in 4. You can charge it with the built-in 1000mah high-capacity battery.

5. Double axis 360 degree rotation to meet your various needs.

6. Using the Bluetooth remote, it’s easy to take selfies with just one click.

Specification:
Product name: Multifunctional portable support mobile phone holder lampe
Product number:Phone Holder B001
Bluetooth working range: within 10m
Rated input: DC5V / 200mA
Battery capacity: 1000mah
Remote control battery capacity: 50mAh
Main material: aluminum alloy + ABS + PC
Working temperature: -10°C ^ + 40°C
Support system: Android, i0s
Size: 210 * 80 * 63mm
Stretching length: 1300mm
Net weight: 1116g
Gross weight: 1236g

Package Included:
1X Multifunctional portable support mobile phone holder lampe
1X charging cable